Heavy Duty Bearing Race Starter Service Kits

10908: No Adapters or Cylinder - Core Kit Only

Remove and install the Bearing Races literally in minutes on aluminum and steel hubs utilizing bearing specific adapters. The design of the split ring clamp allows the tool to grip virtually the entire diameter of the race. Changeable adapters make the Bearing Race Service Kits very versatile.

Please Note: The 10908 Kit requires the Wheel be removed from the Hub before removing the Bearing Race. The 2 Hydraulic Kits, the 10909 and 10910 do not require the Wheel to be removed from the Hub. Both Kits are capable of removing the Bearing Race once wheel with Hub are removed from the truck with no further breakdown.

10908 Kit Requires a 20 Ton Shop Press and at least one adapter kit to operate.

 10910 Kit Requires the 17202 Hydraulic Cylinder, a 10,000 psi pump and at least one adapter kit to operate.

10909 Kit Requires a 10,000 psi pump & at least one adapter kit to operate. This Kit includes the 17202 Hydraulic Cylinder,

10908 Bearing Race Starter Kit:

Provides fast and effective removal and installation of Bearing Races in minutes on a stripped-down hub utilizing optional bearing specific adapters and a shop press.

The split ring is forced to expand over the wedge, increasing the diameter of the split ring until the ring clamps onto the bearing race. Split rings are made from high-grade steel.

The shop press applies force to the split ring/wedge assembly, pressing the bearing race out with ease. The 10908 Bearing Race kit provides a safe and easy method for servicing bearing races. No more  time-consuming, cumbersome and dangerous traditional welding, hammering and punching methods are needed. No more injury to technicians.

Application:

• Eliminates injuries due to hammering, punching and welding methods
• Manufactured from high-grade steel for strength and durability
• Interchangeable adapters for maximum flexibility
• Note: Requires a 20 ton shop press and at least one Adapter Kit to operate
• Note: To Service Bearing Races while the wheels remain on the hub, see Hydraulic Bearing Race kit 10909 or 10910

10909 Hydraulic Bearing Race Starter Kit (Includes Cylinder):

 Removed and installed Bearing Races in minutes while the wheels remain on the hub. The 10909 is a hydraulically powered kit that horizontally services bearing races when used together with bearing specific adapters.

Removing and reinstalling the wheels from the Hubs can be time consuming for technicians and add cost to their customers. Lug nuts require re-torquing after the first 50 to 100 miles of service, putting the truck back in the shop and adding more cost for the customer. Leaving the wheel mounted to the hub is the only professional way to go. Time and money are saved and it improves the lifespan of the wheel studs by not unnecessarily retorquing them.

Application:

• Service Bearing Races while the wheels remain on the hub
• Eliminates injuries due to hammering, punching and welding methods
• Manufactured from high-grade steel for strength and durability
• Includes 17202 Hydraulic Cylinder with 20 Tons of pulling power
•  Includes an aluminum ring to mitigate the risk of damage to ABS ring located on the inboard side of the hub
• Available Interchangeable adapters for maximum flexibility
• Note: Requires a 20 Ton Pump and at least one Adapter Kit to operate

10910 Hydraulic Bearing Race Starter Kit w/o Cylinder:

Removed and installed Bearing Races in minutes while the wheels remain on the hub. The 10910 is a hydraulically powered kit that horizontally services bearing races when used together with bearing specific adapters.

Designed to save you money if you already own the 17202 Hydraulic Cylinder, the 10910 combines with the 17202 to become a fully functional 10909 system.

Removing and reinstalling the wheels from the Hubs can be time consuming for technicians and add cost to their customers. Lug nuts require re-torquing after the first 50 to 100 miles of service, putting the truck back in the shop and adding more cost for the customer. Be professional and leave the wheel mounted to the hub. Time and money are saved and it improves the lifespan of the wheel studs by not unnecessarily retorquing them

Application:

• Service Bearing Races while the wheels remain on the hub
• Eliminates injuries due to hammering, punching and welding methods
• Manufactured from high-grade steel for strength and durability
•  Includes an aluminum ring to mitigate the risk of damage to ABS ring located on the inboard side of the hub
• Available Interchangeable adapters for maximum flexibility
• Note: Requires 20 ton Pump and Cylinder and at least one Adapter Kit to operate

Need an Individual Tool?:

• Single Bearing Race Adapters