Choose PayPal Checkout in the Shopping Cart. It’s Safe. It’s Free. It’s Smart!


free shippingInternal Tire Sensors With Straps - Minimum of 2

Price: $ 79.00 ea.
w/Band



Select Rim Size:




Top Features:

  • Internal Tire Sensor
  • Check PSI & Temperature Without Removing Tire Sensor
  • Brass Valve Stems

Truck System - Internal Tire Sensors - TST507INT-S1

 Internal Flow-Through Tire Sensors



  •  Availability:
  •  Out of Stock
  •  Weight:
  •  
  •  Shipping:
  •  Free
  •  Tax:
  •  Paid
  •  Manufacturer:
  •  Truck System
  •  Model No.:
  •  TST507INT-S1
  •  Dimension:
  •  
  •  Height:
  •  
  •  Warranty:
  •  3 Years
  •  Returns:
  •  30 days w/ 15% Restocking Fee



  • Shipping
    GuideShipping Guide
  • User Manual
    / Tips
  • Instruction
    Sheet
  • TST Guide
    & FAQ
  • Monitor
    Installation
  • Color
    Monitor
  • Repeater
    Installation
  • Dual Tire
    Installation



Includes:

  • 2 TST507INT Sensors (Internal)
  • 2 Straps (Your Choice)


Rim Size

Rim Size




TST 507 Series Wide Screen Display Instructional Video (8.24 sec)




TST 507 Series Wide Screen Display Tips (8.2 min)




TST 507 Series Wide Screen Display Manually entering a sensor code (4.40 min)




Internal Sensor Installation With Adaptors on a Peterbilt Glider (1.38 min)




The Internal Tire Sensor TST507INT mount internally on provided rim straps. Internals are very versitile and can be used on just about any Tire or vehicle type.




Installing the Internal Sensor

Internal Sensor Figure 1 Internal Sensor Figure 2 Internal Sensor Figure 3
  1. Remove the wheel from the vehicle and deflate the tire
  2. Remove the tire from the wheel
  3. If the sensor is not already attached to the band, attach the sensor to the band clamp with the two screws. Torque the screws to 3 in-lbs (0.3-0.4Nm). See Figure 1
  4. Put the sensor and band clamp in the center position (sometimes known as the "well") of the wheel hub
    • IMPORTANT: Sensor should be installed 180 degrees from the tire valve stem. See Figure 2
    • CAUTION: MAKE SURE THE BAND CLAMP IS COMPLETELY INSTALLED ON THE WHEEL HUB AND DOES NOT MOVE OR SWAY
  5. Tighten the band clamp on the wheel hub. See Figure 2
  6. Torque the band clamp screw to 30-45 in-lbs (3.4-5.1 Nm). See Figure 3
  7. Ensure sensor does not move laterally or rotate on wheel hub
    • IMPORTANT: Trim excess band, leaving 3 inches. To avoid damage to the tire bead as the tire is mounted to the wheel, do not let the trimmed end of the band protrude away from the wheel. See Figure 2
  8. Install the tire onto the wheel
  9. Inflate the tire to the manufacturer’s recommended pressure
  10. Check the tire balance per the tire balance machine instructions
  11. Install the wheel/tire assembly onto the vehicle per manufacturer’s instructions



TST TPMS How To (6.14 min)




TST 507 Series Wide Screen Display Setting the Temperature Alert Parameters (3.2 min)




TST 507 Series Wide Screen Display Deleting a sensor (4.39 min)




TST 507 Series Wide Screen Display Setting high and low pressure parameters (5.35 min)




TST 507 Series Coding (4.39 min)




TST 507 Series Wide Screen Display Moving a tire to a different position (1.30 min)




TST 507 Series Wide Screen Display How to set up multiple trailers (3.44 min)




TST 507 Series Wide Screen Display Configuring Bar PSI F C (3.5 min)