Choose PayPal Checkout in the Shopping Cart. It’s Safe. It’s Free. It’s Smart!


free shipping6 Internal TPMS Tire Sensors with Straps

Perfect for Super Singles or Pickups with Single Axel Boat Trailers

Price: $ 663.00



Select Rim Size:







Top Features:

  • TPMS Kit-6 Internal Sensors
  • Perfect for Semi with Super Single
  • Works With Any Truck or RV Configuration
  • Real Time Tire Temperature & Pressure Readings
  • Increased Awareness: Safety, Fuel Economy, & Tire Life
  • Wide Screen Color Monitor
  • Water Resistant Sensors

Truck System - 6 Internal TPMS Tire Sensors with Straps - TST507INT6

6 Internal TPMS Flow-Through Tire Sensors



  •  Availability:
  •  In Stock
  •  Weight:
  •  
  •  Shipping:
  •  Free
  •  Tax:
  •  Paid
  •  Manufacturer:
  •  Truck System
  •  Model No.:
  •  TST507INT6
  •  Dimension:
  •  
  •  Height:
  •  
  •  Warranty:
  •  3 Years
  •  Returns:
  •  30 days w/ 15% Restocking Fee



  • Shipping
    GuideShipping Guide
  • User Manual
    / Tips
  • Instruction
    Sheet
  • TST Guide
    & FAQ
  • Monitor
    Installation
  • Color
    Monitor
  • Repeater
    Installation
  • Dual Tire
    Installation



Includes:

  • 6 Tire Sensors
  • 6 Inner Rim Bands
  • Color Monitor
  • Trailer Exchange Repeater
  • Long Antenna
  • Numbered Sensor-Position Stickers
  • USB and 12V Charging Capabilities
  • Suction Cup Display Mount
  • Rubber Display Mount
  • Detailed User Manual


Rim Size

Rim Size



TST 507 Series Wide Screen Display Instructional Video (8.24 sec)




TST 507 Series Wide Screen Display Tips (8.2 min)




TST 507 Series Wide Screen Display Manually entering a sensor code (4.40 min)




Internal Sensor Installation With Adaptors on a Peterbilt Glider (1.38 min)




The TST507INT6 is a 6 Internal Sensor Kit. The TPMS System helps you monitor your tire pressure and temperature. It warns you of any issues that may create unsafe driving conditions.

The internal sensor sends audible and visual alerts to the drivers through any of the displays when temperature or pressure is outside of the user customizable thresholds. The system is comprised of 3 major components; sensors, signal repeater and a monitor.

Kit includes a Repeater. A Repeater Consist of a Receiver, an Amplifier and Transmitter. Unlike most Amplifiers, the Repeater eliminates unwanted noise



Monitor Components & Icons:

Monitor Indicators
  1. Antenna
  2. Go Button
  3. Set Button
  4. Back Button
  5. Red LED Indicator
  6. Light Sensor
  7. - Button
  8. + Button
  9. Power On/Off
  10. Charging Port


Monitor Display Icons



Installing the Internal Sensor

Internal Sensor Figure 1 Internal Sensor Figure 2 Internal Sensor Figure 3
  1. Remove the wheel from the vehicle and deflate the tire
  2. Remove the tire from the wheel
  3. If the sensor is not already attached to the band, attach the sensor to the band clamp with the two screws. Torque the screws to 3 in-lbs. (0.3-0.4Nm). See Figure 1
  4. Put the sensor and band clamp in the center position (sometimes known as the "well") of the wheel hub
    • IMPORTANT: Sensor should be installed 180 degrees from the tire valve stem. See Figure 2
    • CAUTION: MAKE SURE THE BAND CLAMP IS COMPLETELY INSTALLED ON THE WHEEL HUB AND DOES NOT MOVE OR SWAY
  5. Tighten the band clamp on the wheel hub. See Figure 2
  6. Torque the band clamp screw to 30-45 in-lbs. (3.4-5.1 Nm). See Figure 3
  7. Ensure sensor does not move laterally or rotate on wheel hub
    • IMPORTANT: Trim excess band, leaving 3 inches. To avoid damage to the tire bead as the tire is mounted to the wheel, do not let the trimmed end of the band protrude away from the wheel. See Figure 2
  8. Install the tire onto the wheel
  9. Inflate the tire to the manufacturer’s recommended pressure
  10. Check the tire balance per the tire balance machine instructions
  11. Install the wheel/tire assembly onto the vehicle per manufacturer’s instructions



TST TPMS How To (6.14 min)




TST 507 Series Wide Screen Display Setting the Temperature Alert Parameters (3.2 min)




TST 507 Series Wide Screen Display Deleting a sensor (4.39 min)




TST 507 Series Wide Screen Display Setting high and low pressure parameters (5.35 min)




TST 507 Series Coding (4.39 min)




TST 507 Series Wide Screen Display Moving a tire to a different position (1.30 min)




TST 507 Series Wide Screen Display How to set up multiple trailers (3.44 min)




TST 507 Series Wide Screen Display Configuring Bar PSI F C (3.5 min)