Choose PayPal Checkout in the Shopping Cart. It’s Safe. It’s Free. It’s Smart!


free shippingInternal TPMS 10 Tire Sensors with Straps

Works Well for Standard Truck Tractors

Price from:
$ 946.00



Rim Size:



Monitor Options:





Top Features:

  • TPMS-10 Internal Sensors with Straps
  • Real Time Pressure Readings & Tire Temperature
  • Warns You of Any Issues In Unsafe Driving Conditions
  • Water Resistant Sensors
  • Internal Sensor Works on RV & Truck
  • Wide Screen Monitor Options:
    • Monochrome
    • Color

Truck System - Internal TPMS 10 Internal Tire Sensors with Straps - TST507INT10

Internal TPMS 10 Flow-Through Tire Sensors



  •  Availability:
  •  In Stock
  •  Weight:
  •  
  •  Shipping:
  •  Free
  •  Tax:
  •  Paid
  •  Manufacturer:
  •  Truck System
  •  Model No.:
  •  TST507INT10
  •  Dimension:
  •  
  •  Height:
  •  
  •  Warranty:
  •  3 Years
  •  Returns:
  •  30 days w/ 15% Restocking Fee



  • Shipping
    GuideShipping Guide
  • User Manual
    / Tips
  • Instruction
    Sheet
  • TST Guide
    & FAQ
  • Monitor
    Installation
  • Monochrome
    Monitor
  • Color
    Monitor
  • Repeater
    Installation
  • Dual Tire
    Installation



Includes:

  • 10 Tire Sensors
  • 10 Inner Rim Bands
  • Choice of Monitor
    • Monochrome
    • Color
  • Trailer Exchange Repeater
  • Long Antenna
  • Numbered Sensor-Position Stickers
  • USB and 12V Charging Capabilities
  • Suction Cup Display Mount
  • Rubber Display Mount
  • Detailed User Manual


Other Photo

TST507INT10 Kit




Rim Size

Rim Size



TST 507 Series Wide Screen Display Instructional Video (8.24 sec)




TST 507 Series Wide Screen Display Tips (8.2 min)




TST 507 Series Wide Screen Display Manually entering a sensor code (4.40 min)




Internal Sensor Installation With Adaptors on a Peterbilt Glider (1.38 min)




The TST507INT10 kit includes 10 internal sensors. The Tire Pressure Monitoring System warns you of any issues that may create unsafe driving conditions in which most blowouts happened due to under inflation.

The internal sensor sends audible and visual alerts to the drivers through monitor display when temperature or pressure is outside of the user customizable thresholds.

Kit Comes with a Repeater/Amplifier. A Repeater Consist of a Receiver, an Amplifier and Transmitter. Unlike most Amplifiers, the Repeater eliminates unwanted noise.



Monitor Components & Icons:

Monitor Indicators
  1. Antenna
  2. Go Button
  3. Set Button
  4. Back Button
  5. Red LED Indicator
  6. Light Sensor
  7. - Button
  8. + Button
  9. Power On/Off
  10. Charging Port


Monitor Display Icons



Installing the Internal Sensor

Internal Sensor Figure 1 Internal Sensor Figure 2 Internal Sensor Figure 3
  1. Remove the wheel from the vehicle and deflate the tire
  2. Remove the tire from the wheel
  3. If the sensor is not already attached to the band, attach the sensor to the band clamp with the two screws. Torque the screws to 3 in-lbs. (0.3-0.4Nm). See Figure 1
  4. Put the sensor and band clamp in the center position (sometimes known as the "well") of the wheel hub
    • IMPORTANT: Sensor should be installed 180 degrees from the tire valve stem. See Figure 2
    • CAUTION: MAKE SURE THE BAND CLAMP IS COMPLETELY INSTALLED ON THE WHEEL HUB AND DOES NOT MOVE OR SWAY
  5. Tighten the band clamp on the wheel hub. See Figure 2
  6. Torque the band clamp screw to 30-45 in-lbs. (3.4-5.1 Nm). See Figure 3
  7. Ensure sensor does not move laterally or rotate on wheel hub
    • IMPORTANT: Trim excess band, leaving 3 inches. To avoid damage to the tire bead as the tire is mounted to the wheel, do not let the trimmed end of the band protrude away from the wheel. See Figure 2
  8. Install the tire onto the wheel
  9. Inflate the tire to the manufacturer’s recommended pressure
  10. Check the tire balance per the tire balance machine instructions
  11. Install the wheel/tire assembly onto the vehicle per manufacturer’s instructions



TST TPMS How To (6.14 min)




TST 507 Series Wide Screen Display Setting the Temperature Alert Parameters (3.2 min)




TST 507 Series Wide Screen Display Deleting a sensor (4.39 min)




TST 507 Series Wide Screen Display Setting high and low pressure parameters (5.35 min)




TST 507 Series Coding (4.39 min)




TST 507 Series Wide Screen Display Moving a tire to a different position (1.30 min)




TST 507 Series Wide Screen Display How to set up multiple trailers (3.44 min)




TST 507 Series Wide Screen Display Configuring Bar PSI F C (3.5 min)