Choose PayPal Checkout in the Shopping Cart. It’s Safe. It’s Free. It’s Smart!
Made with Pride in the USA
See our complete list of CB Radio Accessories
FireStik Antennas at RoadTrucker starts with the FireStik II "FS" Series 40 Channel Plus CB Antenna, which is known for its ′bare-hands tunable tip', high power handling, and high-performance coil design that maximizes the transmit/receive functions of your CB radio.
The FS Series combines the performance of the popular "KW" series antennas and added an ease of tuning mechanism to the top. The "FS" antennas should be fine-tuned (SWR) in their final mounting location and to do this, you just pop-of the tip and turn the adjustment screw up or down as needed.
FireStik 300-watt FS Series 2ft CB Antenna is wound with heavy insulated copper wire. Custom blended, glass fiber reinforced shaft and 3/8" x 24 threaded base with diminished contact end.
The tunable tip is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning.
The FireStik KW Series 400-watt Whip-Antenna has rugged solid-fiberglass core and is compatible with trucks, vans, motorcycles and ATVs in a single antenna or dual (co-phased) configuration.
Factory bench tested for resonant frequency and overall quality. This 4ft 400-watt Whip Antenna is covered with a static reducing, water-tight sleeve.
The FireStik KW Series 300-watt Whip-Antenna is used for RVs, trucks, motorbikes and ATVs either as a single or dual antenna.
Factory bench tested for resonant frequency. This 3ft 300-watt Whip Antenna is made of solid, heavy-duty fiberglass core. Covered with water-tight sleeve to a reduce static .
The FireStik KW Series 100-watt Whip-Antenna is factory bench tested to ensure long-term quality. Suitable for trucks, RVs, motorhomes, motorcycles and ATVs in a single antenna or dual (co-phased) configuration.
With durable solid-fiberglass core. This 2ft 300-watt Whip Antenna is protected with a water-tight sleeve that lessens static.
"World′s Best" Antenna Stud Mount K-4A.
The K-4A stud mount should be used whenever a PL-259 terminated coax cable is to be used.